Connect with us

Equipment

Eaton takes aim at vehicle electrification market with new eMobility business

Published

on

SOUTHFIELD, Mich. — Power management company Eaton is addressing increasing demand for high-voltage electrified vehicle technologies with the creation of its new eMobility business.

With a focus on intelligent power electronics, power systems and advanced power distribution and circuit protection, eMobility is poised to capitalize on a global vehicle electrification market projected to grow to 15 million pure battery-electric vehicles and another 30 million hybrids, from mild to plug-in, by 2030, according to Jeff Lowinger, president, eMobility.

eMobility was formed by combining products, expertise and global manufacturing capabilities from Eaton’s electrical and vehicle businesses.

Lowinger said Eaton plans to invest more than $500 million over the next five years to develop new products and technologies, including smart diagnostic technologies, intelligent power electronics and predictive health monitoring, to further strengthen its global capabilities and deliver intelligent electrification products and solutions to passenger car, commercial vehicle and off-highway customers.

Eaton has over 15 years of experience developing hybrid systems with more than 15,000 HEV and PHEV systems on the road in the U.S., Europe, China and other Asia-Pacific markets. Eaton also has high-voltage, fast-acting fuses in nearly 50 percent of global electrified cars, and power electronics on a leading European battery-electric vehicle platform.

As a global supplier, Lowinger said Eaton has extensive knowledge of vehicle dynamics and safety standards, and experience managing high-voltage power distribution, circuit protection and advanced electric power quality systems.

Eaton’s electrical business has products installed in some of the world’s largest data centers, hospitals, factories and other areas that consume large amounts of electricity and where uninterruptable power flow is critical, and is bringing that institutional knowledge and expertise to the automotive and commercial vehicle markets with eMobility.

“Our understanding of the unique needs of vehicle customers, along with our experience in transmissions and power electronics in the hybrid space, gives us a distinct advantage versus other suppliers,” Lowinger said. “Customers using Eaton hybrid systems have collectively accumulated an estimated 2 billion miles of clean, reliable service.”

Lowinger said eMobility focuses on three primary areas for both automotive and commercial vehicle customers: intelligent power electronics, power systems and advanced power distribution and circuit protection.

The power distribution and protection category includes fuses, supercapacitors and power distribution units (PDUs), while converters and on-board chargers fall under the power electronics umbrella. Power systems include electric vehicle (EV) transmissions for a variety of medium- and heavy-duty applications, as well as a 48-volt regenerative accessory drive system for heavy-duty trucks.

Eaton’s existing line of electrified products — which includes DC/DC converters, PDUs, hybrid and battery-electric transmissions, and high-voltage fuses — serve as the foundation for eMobility to build additional growth as electrification increases. Eaton projects its current electrified portfolio will account for approximately $300 million in revenue in 2018, and forecasts revenues of $2 to $4 billion by 2030 as new products and customers are added to the eMobility portfolio.

eMobility is a global business headquartered in Southfield, Michigan, with design centers and manufacturing locations in Asia, Europe and the Americas, and today employs approximately 1,200 employees.

Eaton is a power management company with 2017 sales of $20.4 billion.

For more information, visit .

Continue Reading
Advertisement
Click to comment

Leave a Reply

Your email address will not be published. Required fields are marked *

Equipment

Bendix set to deliver Safety Direct event video with new app

Published

on

In addition to enabling full SafetyDirect access, the forthcoming SafetyDirect Mobile app will also allow drivers to securely identify themselves in the vehicle. (Courtesy: BENDIX COMMERCIAL VEHICLE SYSTEMS)

ELYRIA, Ohio — Video information and other data captured by today’s commercial vehicle systems is both valuable and vital as fleets and drivers aim to improve safety on the roads.

A new mobile device application from Bendix Commercial Vehicle Systems will deliver quicker access to that information, pairing with Bendix’s leading-edge hardware and its SafetyDirect system to enhance fleet safety and driver training efforts.

“The app is called SafetyDirect Mobile. It is fully compatible with our powerful new fifth-generation SafetyDirect processor and our AutoVue LDW 5G platform, and it has been developed to enhance the new features provided by our new hardware,” said TJ Thomas, Bendix director of marketing and customer solutions – controls. “It means when you are standing next to the vehicle, you will be able to directly connect to the SafetyDirect processor – using Wi-Fi – and stream SafetyDirect video directly to the app. That’s a very powerful tool – and an industry first.”

Bendix expects to launch the app in the third quarter of this year.

SafetyDirect by Bendix CVS is Bendix’s user-friendly web portal that provides fleet operators with comprehensive feedback on their fleet and drivers, along with videos of severe events, Thomas said.

SafetyDirect, the only fleet camera system available as a factory-installed option at all major truck manufacturers, gives fleets key insights into common driving behaviors and trends across their operation. It wirelessly transmits the driver performance information and event-based data – video, vehicle, and sensor information from a vehicle’s J1939 network – to a secure web portal, providing fleets the necessary tools to help enhance their safety program.

In addition to enabling full SafetyDirect access, the forthcoming SafetyDirect Mobile app will also allow drivers to securely identify themselves in the vehicle, Thomas said. The app is part of a phased introduction of new features and advanced functionality expected to occur throughout 2019.

Because no advanced driver assistance technology can replace the need for safe and alert drivers practicing safe driving habits, Bendix stresses the importance of comprehensive, proactive driver training, and providing fleets with actionable information and tools to support their safety efforts.

“Informed fleets and drivers help enable safer fleets and drivers,” Thomas said. “The easier we can make it to reinforce good driving, sharpen training programs, and support the men and women behind the wheel, the safer our highways become.”

Bendix Commercial Vehicle Systems, a member of the Knorr-Bremse Group, develops and supplies leading-edge active safety technologies, energy management solutions, and air brake charging and control systems and components under the Bendix brand name.

For more information, visit .

 

Continue Reading

Equipment

Trailer orders down 9 percent from January, ACT says

Published

on

February net orders slid 9 percent from January volume and were 29 percent below the same month last year. (Courtesy: GREAT DANE)

COLUMBUS, Ind. — ACT Research’s preliminary estimate for February 2019 net trailer orders is 23,800 units.

Final volume will be available later this month.

ACT said its methodology allows the company to generate a preliminary estimate of the market that should be within +/- 3 [ercent of the final order tally.

“February net orders slid 9 percent from January volume and were 29 percent below the same month last year,” said Frank Maly, ACT’s director of CV transportation analysis and research.

“The sequential net order decline matches the industry order pattern of the past two years. With the majority of this year’s build slots already committed, and many OEMs unwilling to open next year’s order board this early, the potential for higher gross orders is somewhat limited at this point. Additionally, cancellations were roughly 1 percent of industry backlog last month. While not excessive, that generates some headwinds for net order volumes as well”

Maly said the order number was still solid, but a softer order count combined with stronger production volumes in February resulted in a 1 percent decline in industry backlog at month-end. “Backlog has remained relatively stable for the past four months, reaching an all-time high in December,” Maly said. “At current production rates, the order board commits the industry into November on average, although dry vans backlogs stretch into mid-December, while reefer commitments actually edge into next year.”

ACT Research is a publisher of commercial vehicle truck, trailer and bus industry data, market analysis and forecasting services for the North American and China markets.

For more information, visit .

 

 

Continue Reading

Equipment

Cummins X12 Wins truck writers’ Technical Achievement Award

Published

on

Krista Toenjes, Cummins’ North American manager of on-highway sales and marketing, accepts this year’s Technical Achievement Award from Jim Park, chairman of the truck writers committee which determines the annual honor. (Courtesy: ATATMC)

ATLANTA — Cummins’ lightweight but powerful X12 diesel has won the annual Jim Winsor Memorial Technical Achievement Award.

The honor was presented recently by a group of trucking news writers during the American Trucking Associations Technology & Maintenance Council meeting.

“As in previous years, there were a number of very worthy candidates nominated by members of our awards committee, and debate was lively,” said Jim Park, chairman of the Award Committee who writes for Heavy Duty Trucking and Today’s Trucking magazines. “But in our voting, the X12 emerged as the top product from a final field of four.”

The runners up were the Peterson Pulse electronic system for trailers, Stemco’s automatically deploying Trailer Tail and the Stemco-Webb Trifecta wheel hub.

Weight is always an issue in spec’ing and operating trucks, especially with bulk haulers and in vocational applications, and the X12’s comparatively low weight, along with millions of miles of previous service in Asia and South America, make it a standout among diesel offerings, members of the awards committee agreed.

The 11.8-liter X12’s dry weight is 2,050 pounds, 150 to 400 pounds less than 11- to 13-liter competitors, yet it makes up to 500 horsepower and 1,700 pound-feet of torque, according to Cummins. Innovative engineering trims pounds from the cylinder block but maintains high strength for long life, while advanced combustion design and effective air and fuel handling and promises high efficiency.

The X12 went into North American production and became available to customers in 2018, which made it eligible for the latest Technical Achievement Award, Park said. The engine is now an option from Autocar, Freightliner and Western Star.

Cummins, the industry’s sole independent engine manufacturer, won the award twice before, in 2017 for its X15 Efficiency Series diesel, and in 1998 for its Signature 600 diesel. In 2007, Cummins Filtration earned the award for its Fleetguard User Friendly filters.

The Truck Writers of North America, predecessor to today’s Award Committee, gave the first Technical Achievement Award went to Grote Industries for its red LED marker lamp, a technology that has become standard on trucks and trailers and across the automotive world.

Two years ago, the committee named the award after the late Jim Winsor, a 50-year veteran of the trucking trade press. He served as editor-in-chief at Commercial Carrier Journal and executive editor at Heavy Duty Trucking, and was active in the Technology & Maintenance Council and its forerunner, The Maintenance Committee.

Aside from Park, members of the awards committee included John Baxter, a freelance technical writer; Tom Berg, with Construction Equipment and Land Line magazines; Jason Cannon, Commercial Carrier Journal; Seth Clevenger, Transport Topics; James Menzies, Truck News & Truck West; Jason Morgan, Fleet Equipment; Jack Roberts, Heavy Duty Trucking; John G. Smith, Today’s Trucking; Suzanne Stempinski, Land Line; and Steve Sturgess, freelance writer.  8

Continue Reading

Trending

start-sport.com.ua/boevye-iskusstva/boks/kapy

www.adulttorrent.org/details/brenna_sparks_fucks_her_roommate_

www.adulttorrent.org/search/Creamy/2